Meet the trainers.

Extensive engineering and supervision experience in factory set-up, operations, facilities and maintenance of process and equipment in multinational industry, and in a Class A civil works construction company specialising in quality, audits and HSE management. He has specialised in HSE management in manufacturing, construction and oil and gas for the past 17 years.

In the front-end electronics industry he acquired hands-on experience in hazardous materials (HAZMAT), radiation and project management, with technology transfer and training in Japan, chemical distribution system training in Arizona, USA, and facility set-up and radiation technology transfer in Austria. He has also been exposed to Factory Mutual (FM) audits as part of organisational risk management, and trained in Authorised Gas Tester (AGT), radiation protection, facility and equipment safety set-up, traffic safety management in construction, emergency response planning (including Incident Command System), fire safety and first aid (including AED).

In construction he was involved in projects in Sarawak including Dewan Undangan Negeri (DUN) Sarawak, the Tanjung Kidurong-Suai-Bakam (TKSB) Road and the Assar Senari Independent Oil Terminal (IOT), in charge of overall QHSE performance and improvement. In oil and gas he helped establish an HSE culture framework linking the hardware of the HSE management system with the software of management and worker issues.

Education

• Bachelor of Engineering (Mechanical), University of Queensland, Australia
• Executive Master in Business Administration (eMBA), Universiti Teknologi MARA (UiTM)

Registrations and credentials

• Registered Safety & Health Officer
• Radiation Protection Officer
• HRDF Train The Trainer
• Certified auditor, ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007
• Traffic Management Officer (TMO)
• NEBOSH International General Certificate in Occupational Safety and Health

Capt. Mohd Adam Marsidi (R) is an experienced OSH practitioner (competent SHO), especially in the construction industry, a trainer and auditor in occupational health and safety management systems (OHSAS 18001), an occupational safety and health auditor, a SHASSIC auditor registered with CIDB and a qualified physical security management trainer.

He served in the Armed Forces from 1981 and, after retiring in 1994, held roles with several multinational and public-listed companies: IREKA Engineering & Construction Sdn Bhd, Leighton Contractors (M) Sdn Bhd, Putra Perdana Construction Sdn Bhd, Megasteel Sdn Bhd (Steel Division of Lion Group), PECD Sdn Bhd, Petroliam Nasional Berhad (PETRONAS), Land & General Berhad and USRA Sdn Bhd.

A member of the Malaysian Society for Occupational Safety & Health (MSOSH) and corporate member of the National Institute of Occupational Safety & Health (NIOSH), he has conducted numerous safety trainings, OSH consultancies, audits and safety and health inspections in manufacturing, construction and services and utilities. He is also an expert in quality assessment, control and development, and believes training must be extremely practical to produce immediate results.

Education

• PhD in Occupational Health and Safety, Universiti Putra Malaysia (UPM)
• Master of Science in Occupational Safety and Health Management (UUM)
• Bachelor's Degree (Hons) in Public Management (UUM)
• Diploma in Law (UiTM)

Registrations and memberships

• Registered Safety & Health Officer, DOSH
• SHASSIC Assessor, CIDB
• Member, Malaysian Society for Occupational Safety & Health (MSOSH)
• Corporate member, National Institute of Occupational Safety & Health (NIOSH)

Puan Norwani Ahmat has more than 15 years of experience in Safety, Health and Environment (SHE). She is the author of the book I am OSH Practitioner, published in July 2016.

Education

• Degree in Chemical and Process Engineering, UKM

Registrations and credentials

• Certified Safety & Health Officer (SHO)
• Certified International Training Practitioner (CIPD), UK
• Certified CIDB Assessor
• Certified Lead Auditor for OHSAS 18001 & ISO 14001
• Train the Trainer (TTT) and PSMB trainer
• NIOSH External Instructor
• Member of Majlis Keselamatan Jalanraya Negeri Selangor (MKJR)

Experience

• Diamond Chemical Industries Sdn Bhd - Chemist
• Philips Semiconductors Seremban - Process Engineer
• Philips Semiconductors Seremban - EHS Engineer
• Sime Darby Berhad - Senior EHS Executive
• Faber Group Berhad - SHE Manager
• Nestle Manufacturing (M) Sdn Bhd - SHE Manager
• MMC Gamuda (PDP) KVMRT - Safety and Health Manager
• Proton Holdings Berhad - Senior SHE Manager / Head of Department

Mohd Fadzil Ahmad, HSE consultant and practitioner, is a registered SHO with JKKP and holds several international safety board certifications. He has more than 25 years of experience in engineering disciplines including facilities operations and maintenance, safety, health and environment (HSE), and project development and management. He served as an engineer in the Royal Malaysian Air Force from 1981 to 1991 and attained the rank of Captain.

He received technical training in the United States Air Force, graduated from the Fire Service College, United Kingdom, in Fire Engineering & Operation, and obtained a BSc from Saint Louis University, Missouri, and an MSc in Occupational Safety and Health. He is certified in HAZMAT Incident Analysis by the National Emergency Training Center, United States, and as an NFPA Fire Inspector by the National Professional Qualifications Board, USA.

He has worked with high-risk organisations across the defence sector (Royal Malaysian Air Force), gas (Gas Malaysia Sdn Bhd), medical manufacturing (Johnson & Johnson Medical Mfg (M) Sdn Bhd), LRT (Sistem LRT Sdn Bhd), semiconductor and wafer fab (Mimos Semi-Conductor Sdn Bhd), high-tech R&D (Mimos Bhd) and as HSE consultant with Red Synergy Corporation. His expertise covers auditing, inspection, investigation, emergency response and business continuity planning, training, risk assessment, HAZMAT, fire protection and developing HSE management systems.

He has conducted risk assessment studies, safety audits and safety management systems for high-risk installations such as ammunition and explosive depots, aircraft hangars, radar installations, gas distribution stations, chemical and gas storage, high-technology laboratories (quantum, nano-electronic, microelectronic, FA lab, clean room), data and server centres and workshops.

Registrations and credentials

• NIOSH certified trainer
• PSMB certified trainer
• Certified Lead Auditor, OHSAS 18001 and ISO 14001
• Trained in Six Sigma, People Capability Maturity Model (P-CMM), CMMi, Project Management (PMI) and ISO 9001
• Auditor, Malaysian Society for Occupational Safety & Health (MSOSH) OSH Award Audit

Yusof Kadikon is a lecturer at Universiti Kuala Lumpur Malaysia France Institute (UniKL-MFI). He graduated with a Master of Engineering Management from UPM in 2011 with emphasis on ergonomics and human factors engineering, and received his bachelor's degree in Mechanical Engineering (Industrial Engineering) from UTM, Skudai, with emphasis on ergonomics.

He began his professional work as an Assistant Mechanical Maintenance Junior Engineer at Pelepas Brigentine Service, PTP, Johor. His research interests are ergonomics and human factors engineering, and at the time of the profile he was pursuing a PhD in Industrial Ergonomics at UTHM.

At UniKL-MFI he lectures in the Industrial Automation section under the Industrial Management Unit, teaching project management, safety and health management, maintenance management, computer-aided production management, work study and ergonomics. He is a member of the International Association of Engineers (IAENG), the Malaysian Society of Occupational Safety & Health (MSOSH), NRH-SHE and the Human Factors and Ergonomics Society Malaysia (HFEM), and is experienced with engineering software (AutoCAD, Minitab) and simulation software (Delmia, Witness, Arena).

He is a trainer at NIOSH on Ergonomics and Manual Handling at the Workplace (EMHW) and has wide experience in ergonomics assessment.

Education

• Master of Engineering Management, UPM, 2011 (ergonomics and human factors engineering)
• Bachelor of Mechanical Engineering (Industrial Engineering), UTM, Skudai
• PhD in Industrial Ergonomics, UTHM (in progress at time of profile)

Memberships

• International Association of Engineers (IAENG)
• Malaysian Society of Occupational Safety & Health (MSOSH)
• NRH-SHE
• Human Factors and Ergonomics Society Malaysia (HFEM)

Education

• Safety & Health Officer Certificate (2005)
• Bachelor in Human Sciences (2002): Psychology (Hons.), Universiti Islam Antarabangsa Malaysia

Registrations and memberships

• Registered Safety & Health Officer
• Management Committee, Malaysian Society for Occupational Safety & Health (MSOSH)

Management systems experience

• ISO 14001
• OHSAS 18001
• ISO 9001
• ISO TS 16949
• ISO 22000
• HACCP
• HALAL
• ISCC
• RSPO
• KOSHER
• GMP
• GMP B2

• Sime Darby Plantation Sdn Bhd - NURI Edible Oil (NEO) Complex - ESHMR
• Sime Darby Plantation Sdn Bhd - NURI Edible Oil (NEO) Complex - OHSAS 18001, ISO 14001, ISO 9001, ISO 22000, HACCP, HALAL, KOSHER, ISCC, RSPO, GMP, GMP B2, SHASSIC
• Kencana Petroleum Berhad - ISO 14001 & OHSAS 18001
• MISC Berhad - ISO 14001, ISO 9001
• Kontena Nasional Berhad - OHSAS 18001 OSHMS & IKEA Way
• KEU Group Sdn Bhd - Integrated ISO 14001, OHSAS 18001 & ISO 9001 IMS & ISO TS 16949
• PMCare Sdn Bhd - ISO 9001 QMS